Toshiba’s reliable 2000 series telephones were first released in 1992, manufacturing ceased in 2004, and manufacturer support continued through 2011.
Toshiba digital telephones incorporate state-of-the-art telecommunications technology and provide a vast array of calling features. They are easy to operate, and all features are accessed with a feature button or a brief access code.
Features for the benefit of enhanced productivity:
- 8 Fixed feature buttons include: Message, Microphone, Speaker, Redial, Conference/Transfer, Hold, and Volume up / Volume down
- 20 “flexible” one touch buttons for line appearances or feature programming
- Phones available in White or Charcoal (Black)
- Red/Green LED indicators
- Personal and System Wide programmable Speed Dial numbers
- Call handling features like Caller ID, Auto Attendant and Voicemail
- Tilt stand available as an accessory
Toshiba DKT2020-S Compatible Phone Systems:
Toshiba Strata CIX | Toshiba CTX | Toshiba DK
Programmable Feature Buttons
ACCOUNT CODE BUTTON
Press to enter a Voluntary Account Code anytime during a CO line call without interrupting the conversation.
ALARM RESET BUTTON
Press to turn off a telephone alarm connected to a facility alarm mechanism.
All Call Page
ALL CALL VOICE PAGE BUTTON
Press to page all of the digital and electronic telephones in the All Call Page group.
Auto Busy Redial
AUTOMATIC BUSY REDIAL BUTTON
Press to set up Automatic Busy Redial after receiving busy tone on a dialed CO line call.
LED Light Indication Details
Each line and feature button has a Light Emitting Diode (LED) next to it which indicates the status of the line of feature associated with the button.
LINE BUTTON LED INDICATIONS
Line LEDs light as red or green and flash at varying rates to indicate call status.
Line In-use – When you access an outside line, the LED will appear at your station as follows:
- Flash Rate: 2 seconds on – 1/8 second off – 1/8 second on – 1/8 second off
- Color: Green
- Other stations with the Line: Steady, red
Volume Control Details
Your telephone has two Vd buttons for controlling speaker and handset volume levels. One of these buttons has a symbol that points up, and the other has a symbol that points down. To increase any of the volume levels, press the upward pointing arrow; to decrease any of the levels, press the downward pointing arrow.
Either button must be held down for at least 1/8 of a second for any volume change to occur. If either button is continually held down, the volume will continually change about every ½ second until the level limit is reached or the button is released.
Microphone Sensitivity Controls and Handset/Headset Call Waiting Tone Options
You can set the sensitivity of the microphone on 2000-series speakerphone models to adjust for the level of room noise…
Your station will receive one or more call waiting tones when a call rings you or is camped-on to your telephone while you are busy on another call. These tones are always sent over the speaker of 2000- and 1000-series Digital Telephones; however, on 2000-series Speakerphone models, the tones can also be sent to the handset and the headset.